Sealey SA297 Manual do Utilizador descarregar pdf

Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions

and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL

REQUIREMENTS, WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE

PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL

INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY INSTRUCTIONS

 Follow all workshop safety rules, regulations, and conditions when using wrench.

 WARNING! Disconnect from air supply before changing accessories or servicing.

 Maintain the wrench in good condition and replace any damaged or worn parts. Use

genuine parts only. Unauthorised parts may be dangerous and will invalidate the warranty.

 WARNING! Check correct air pressure is maintained and not exceeded. We recommend 90psi.

 Keep air hose away from heat, oil and sharp edges. Check air hose for wear before each

use and ensure that all connections are secure.

 Only use impact sockets which are specifically designed for use with an impact wrench.

 Wear approved safety eye/face shield, ear defenders and hand protection.

 WARNING! Due to the possible presence of asbestos dust from brake linings, when working

around vehicle brake systems we recommend you wear suitable respiratory protection.

 Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.

 Keep children and non essential persons away from the working area.

 DO NOT use the wrench for a task it is not designed to perform.

 WARNING! DO NOT use wrench if damaged or thought to be faulty. (Contact Service Agent).

 DO NOT use wrench unless you have been instructed in its use by a qualified person.

 DO NOT carry the wrench by the air hose, or yank the hose from the air supply.

 DO NOT operate wrench if you are tired or under the influence of alcohol, drugs or intoxicating

medication.

 DO NOT carry wrench with your hand on the power trigger in order to avoid unintentional

starting.

 DO NOT direct air from the air hose at yourself or others.

 When not in use disconnect from air supply and store in a safe, dry, childproof location.

INSTRUCTIONS FOR:

AIR IMPACT WRENCH

1”Sq DRIVE PISTOL TYPE

MODEL No: SA297

Drive size:..............................1”

Working/Max torque: ...........1000/1200lb.ft

Ultimate torque: ................... 1500lb.ft

Free Speed: ...................... 4000rpm

Air consumption:......................15cfm

Operating pressure: ................... 90psi

Air inlet size:.......................3/8”BSP

Weight: ...............................6kg

Noise Power: .................. 104.21dB(A)

Noise Pressure: ................. 93.21dB(A)

Vibration: .........................4.54m/s

Pin clutch mechanism provides smooth operation

reducing vibration, whilst still creating a high

torque output. Control direction and power via

4-position lever adjustment on rear of wrench.

Supplied with side handle for added control.

Suitable for commercial and agricultural vehicle

use.

2. INTRODUCTION & SPECIFICATION

Original Language Version

SA297 Issue:4(SP)

13/06/13

1 2 3 4

Resumo do Conteúdo

Página 1 - 1”Sq DRIVE PISTOL TYPE

Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions and properly mai

Página 2 - 3. PREPARING WRENCH FOR USE

For recommended hook-up, procedure is shown in figs 1 & 2.3.1. Air Supply. 3.1.1. Ensure wrench air valve (or trigger) is in the "off"

Página 3 - 5. MAINTENANCE

DO NOT use any additional force upon the wrench in order to remove a nut. DO NOT allow wrench to free run for an extended period of time as

WARNING! – Risk of Hand Arm Vibration Injury.This tool may cause Hand Arm Vibration Syndrome if its use is not adequately managed.This tool is subject

Modelos relacionados GSA02 | SA681 | SA680 | SA682 | SA291 | SA6005 | SA655 | SA29/S | SA2/TS | SA2 | S01002 | SA230 | SA231 | SA686 | SA4 | SA602L | SA6001 | SA51 | SA660 | SA50 |

Comentários a estes Manuais

Sem comentários

Sealey SA297 Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Ferramentas Sealey SA297. Sealey SA297 User Manual Manual do Utilizador

Resumo do Conteúdo

Modelos relacionados GSA02 | SA681 | SA680 | SA682 | SA291 | SA6005 | SA655 | SA29/S | SA2/TS | SA2 | S01002 | SA230 | SA231 | SA686 | SA4 | SA602L | SA6001 | SA51 | SA660 | SA50 |

Comentários a estes Manuais

Manuais e produtos relacionados com Ferramentas Sealey SA297