Sealey VS1270 Manual do Utilizador descarregar pdf

 WARNING! Ensure all Health and Safety, local authority, and general workshop practice regulations are strictly adhered to

when using tools.

 DO NOT use tools if damaged or worn.

 Maintain the tools in good and clean condition for best and safest performance.

 Ensure all threads are clean and well lubricated.

 Ensure vehicle is adequately supported with axle stands, ramps, etc. as appropriate.

 Wear suitable clothing to avoid snagging. Do not wear jewellery. Tie back long hair.

 Wear approved eye protection. A full range of personal safety equipment is available from your Sealey dealer.

 Account for all tools and parts being used and do not leave them in or on the vehicle.

IMPORTANT: Always refer to the vehicle manufacturer’s service instructions, or proprietary manual, to establish the correct

procedure and data. These instructions for use are provided as a guide only.

 WARNING: The warnings,and instructions discussed in this instruction manual cannot cover all possible conditions and

situations that may occur. It must be understood that common sense and caution are factors which cannot be built into this

product, but must be applied by the operator.

INSTRUCTIONS FOR:

FRONT WHEEL BEARING TOOL

FORD TRANSIT

MODEL NO: VS1270

1. SAFETY

2. INSTRUCTIONS

g.1

g.2 g.3

2.1 Removethewheelhub(refertothemanufacturersinstructions).

2.2 Placethebearingseparatorunderthebearingassembly,makingsuretheatsideisfacingupandundertheboltholes.

 Tightenthebearingseparatorbyturningthenutsevenly(g.1B).

2.3 Placethepullerinsertintothecentreofthehub,seeg.1A.

2.4 Slidethetoolsarms(g.2A)undertheseparator,attachramadapter(g.2B),ifneeded,attachtheramextension(notshown)

and make sure that the ram is central on the puller insert.

2.5 TurntheT-bar(g.2C)clockwisetoapplypressuretoremovethebearing.IftheT-barhasbeenwoundinand thebearing

 hasnotbeenreleasedwindouttheT-barandlowertheramtomakeupfortheslack,repeatthisprocessuntilthebearingis

removed.

2.6 Toremovetheinnerpartofthebearing,removetheseparatorandturnitupsidedown,replaceontothehubandtightenthe

 nuts(g.3),repeattheaboveprocessfrom2.4.

Original Language Version

VS1270IssueNo.216/05/11

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

IMPORTANT: No liability is accepted for incorrect use of this product.

WARRANTY: Guaranteeis12monthsfrompurchasedate,proofofwhichwillberequiredforanyclaim.

INFORMATION:Foracopyofourlatestcatalogueandpromotionscalluson01284757525andleaveyourfullnameandaddress,includingpostcode.

Sole UK Distributor, Sealey Group,

KempsonWay,SuffolkBusinessPark,

BurySt.Edmunds,Suffolk,

IP327AR

01284 757500

01284 703534

sales@sealey.co.uk

www.sealey.co.uk

Web

Parts support is available for this product. To obtain a parts listing and/or diagram, please log on to

www.sealey.co.uk, email sales@sealey.co.uk or phone 01284 757500.

Resumo do Conteúdo

Página 1 -

 WARNING! Ensure all Health and Safety, local authority, and general workshop practice regulations are strictly adhered to when using tools. D

Modelos relacionados RE99/09

Comentários a estes Manuais

Sem comentários

Sealey VS1270 Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Ferramentas Sealey VS1270. Sealey VS1270 User Manual Manual do Utilizador

Resumo do Conteúdo

Modelos relacionados RE99/09

Comentários a estes Manuais

Manuais e produtos relacionados com Ferramentas Sealey VS1270