Sealey SUPERMIG140 Manual do Utilizador

Original language versionSUPERMIG140 MODEL No:SUPERMIG140 Issue No:2(L) 05/08/14INSTRUCTIONS FOR:SUPERMIG WELDER © Jack Sealey Limited

Original language versionIMPORTANT: These instructions contain the information you require to prepare your machine for welding, together with a mainte

Original language versionINTRODUCTION: All our Supermig models are suitable for welding with CO², Argon or CO²/Argon mix. Each uses a forced air cooli

Original language version5.1. Mig/Mag welding. Welding wire is automatically fed through an insulated liner to the tip of the torch. The torch co

Original language version On the front panel of the welder is the rating plate, giving the following data: 1 - The BS/EU standard relating to

Original language version7.7. Replacing gears. 7.7.1. An inexperienced welder can allow spatter to build up in the tip and shroud. In severe cas

Original language versionPROBLEM POSSIBLE CAUSE REMEDYWeld current interrupted. Overheating protection activated due to overload. Protection automatic

Original language version © Jack Sealey LimitedSUPERMIG140 Issue No:2(L) 05/08/14