Sealey MM19 Manual do Utilizador descarregar pdf

1.1 PERSONAL PRECAUTIONS

 When using this multimeter, please observe all normal safety rules concerning:

Protection against the dangers of electrical current.

Protection of the meter against misuse.

 Full compliance with safety standards can only be guaranteed if used with the test leads supplied. If necessary, they must

be replaced with genuine Sealey leads with the same electrical ratings. Failure to do so will invalidate the warranty.

 DO NOT use leads if damaged or if the wires are bared in any way.

1.2. GENERAL SAFETY INSTRUCTIONS

 Familiarise yourself with the application and limitations of the multimeter as well as the potential hazards.

IF IN ANY DOUBT CONSULT A QUALIFIED ELECTRICIAN.

 USE EXTREME CAUTION when working with high voltages.

 When the meter is connected to a circuit, do not touch unused meter terminals.

 When the magnitude of the value to be measured is unknown, set the range selector to the highest value available.

 Before commencing testing, follow instructions below and select the correct input sockets, function and range on the

multimeter.

 Before rotating the rotary switch to change functions, disconnect the test leads from the circuit under test.

 Take care when working with voltages above 35V DC or 25V AC rms. These voltages are considered a shock hazard.

Keep fingers behind the probe barriers whilst measuring.

 DO NOT test voltages above 750V AC - 1000V DC - the circuitry of the multimeter may be destroyed.

 WARNING! NEVER connect the multimeter to a voltage source / live circuit when the rotary switch is set to any other

function apart from Voltage testing.

 WARNING! NEVER perform resistance, transistor, diode or continuity measurements on live circuits.

 ALWAYSdischargeltercapacitorsinpowersuppliesanddisconnectthepowerwhenmakingresistanceordiodetests.

 WARNING! Voltage checks on electrical outlets can be difficult and misleading because of the uncertainty of connection to

the recessed electrical contacts. Other means should be used to ensure that the terminals are not “live”.

 DO NOT use the multimeter in a potentially explosive atmosphere.

 NEVER operate the meter unless the back cover and the battery and fuse doors are in place and fastened securely.

 If any abnormal readings are observed, the multimeter must be checked out by an authorised technician.

 When not in use, store the multimeter carefully in a safe, dry, childproof location out of direct sunlight.

Storage temperature range -20°C to 60°C.

 ALWAYS turn off the power and disconnect the test leads before opening the doors to replace the fuse or batteries.



The warnings, cautions and instructions referred to in this manual cannot cover all possible conditions and situations

that may occur. It must be understood that common sense and caution are factors which cannot be built into this

product, but must be applied by the operator.

1.3. SAFETY SYMBOLS

This symbol adjacent to another symbol, terminal or operating device indicates that the operator must refer

to an explanation in the Operating Instructions to avoid personal injury or damage to the meter.

This WARNING symbol indicates a potentially hazardous situation, which if not avoided, could result in death

or serious injury.

This CAUTION symbol indicates a potentially hazardous situation, which if not avoided, may result damage

to the product.

 Thissymbol,adjacenttooneormoreterminalsidentiesthemasbeingassociatedwithrangesthatmay,

in normal use, be subjected to particularly hazardous voltages. For maximum safety, the meter and its test

leads should not be handled when these terminals are energized.

This symbol indicates that a device is protected throughout by double insulation or reinforced insulation.

WARNING

CAUTION

INSTRUCTIONS FOR:

DIGITAL MULTIMETER - 7

FUNCTION

MODEL No: MM19.V3

1. SAFETY

Original Language Version

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS &

CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO

MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR

FUTURE USE.

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these

instructions, and properly maintained, give you years of trouble free performance.

The user shall ensure that test probes are correctly selected in order to prevent danger. Probes shall be selected to ensure

that adequate barriers guard against inadvertent hand contact with live conductors under test and that probes have

minimal exposed probe tips. Where there is a risk of the probe tip short circuiting with other live conductors under

test, it is recommended that the exposed tip length shall not exceed 4mm.

MM19.V3 Issue No: 5(I) - 16/06/14

1 2 3 4 5 6

Resumo do Conteúdo

Página 1 - FUNCTION

1.1 PERSONAL PRECAUTIONS When using this multimeter, please observe all normal safety rules concerning: Protection against the dangers of electric

Página 2 - BATTERY AND

Original Language VersionHigh quality general purpose multimeter with a large (46x25mm), clear and easy-to-read LCD display. Supplied with test leads.

Página 3 - Original Language Version

Original Language Version3. SPECIFICATIONFunction Range Resolution AccuracyDC Voltage(V DC)200mV 100µV±(1.5% reading + 2 digits)2000mV 1mV20V 10mV200

Página 4

Original Language Version4. OPERATION WARNING! Risk of electrocution. High-voltage circuits, both AC and DC, are very dangerous and should be measur

Página 5 - 5. MAINTENANCE

Original Language Version5.1. REPLACING THE BATTERY WARNING! To avoid electric shock, disconnect the test leads from any source of voltage before r

Página 6 - Battery Removal

Environmental Protection. Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be s

Modelos relacionados TM100 | TM103 |

Comentários a estes Manuais

Sem comentários

Sealey MM19 Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Para o carro Sealey MM19. Sealey MM19 User Manual Manual do Utilizador

Resumo do Conteúdo

Modelos relacionados TM100 | TM103 |

Comentários a estes Manuais

Manuais e produtos relacionados com Para o carro Sealey MM19