Sealey TP80 Manual do Utilizador descarregar pdf

 WARNING! This pump must be used in accordance with Health & Safety, government, local authority, and water authority rules and

regulations.

 Familiarise yourself with application and limitations, as well as the potential hazards peculiar to the pump.

 Maintain the pump in good condition. Keep the pump clean.

 Replace or repair damaged parts (use an authorised service agent). Use genuine parts only. Non authorised parts may be dangerous and will

invalidate the warranty.

 DO NOT operate the pump if any parts are damaged or missing as this may cause failure and/or personal injury.

 DO NOT use the pump for any purpose other than for which it is designed.

 DO NOT operate pump out of liquid. The pump pick up area must be completely submerged during operation.

 DO NOT operate the pump during freezing temperatures. DO NOT leave the pump in liquid that may freeze.

 DO NOT carry the pump by its electrical cable, or outlet pipe.

 When not in use rinse pump, drain out any liquid and store in a frost free, safe location

 WARNING! DO NOT allow uncontrolled discharge of contaminated water/harmful chemicals thus polluting the environment.

INSTRUCTIONS FOR:

ELECTRIC JERRY CAN PUMP

MODEL No: TP80

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions

and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/

OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY INSTRUCTIONS

2. INTRODUCTION & SPECIFICATIONS

Easily transfers uid from 5, 10 & 20ltr jerry cans. Compatible for use with petrol, diesel, kerosene and water. Hook storage design allows pump to

attach onto jerry can and features a height adjustable control to accommodate different sized containers. Fitted with auto-stop feature to prevent

overlling. Operated by an electric motor powered by 2 x AA batteries (not included).

Model No: ............................................................... TP80

Hose Length: ............................................................700mm

Flow Rate: ..............................................................9ltr/min

Batteries: ....................................................2 x AA (not included)

TP80 Issue:1 14/03/14

Original Language Version

1 2

 WARNING! This pump must be used in accordance with Health & Safety, government, local authority, and water authority rules and regulations.

3. BATTERY FITTING4. OPERATIONNOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications

Sem comentários

Sealey TP80 Manual do Utilizador