Sealey TP96 Manual do Utilizador descarregar pdf (Página 3)

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

IMPORTANT: No liability is accepted for incorrect use of this product.

WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.

INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.

01284 757500

sales@sealey.co.uk

www.sealey.co.uk

01284 703534

Sole U.K. Distributor

Sealey Group

Bury St. Edmunds

Suffolk. IP32 7AR

Web

Original Language Version

Problem

Possible Cause

Solution

The motor is not running.

Lack of electrical power.

Check the electrical connections.

Rotor jammed.

Check for possible damage or obstruction of the

rotating components.

Motor problems.

Contact your authorised Sealey dealer.

The motor turns slowly when starting.

Power supply is of insufcient voltage.

Increase voltage.

Low or no ow rate.

Low level in source tank.

Rell the tank.

Foot valve blocked.

Clean and/or replace the valve.

Filter clogged.

Clean lter.

Excessive suction pressure

Lower the pump with respect to the level of uid in

the tank or increase the bore of the tubing.

High loss of head in the delivery circuit (working

with the bypass open).

Use shorter tubing or increase the bore.

Bypass valve blocked.

Dismantle the valve and clean or replace it.

Air entering the pump or suction tube.

Check seals and connections.

A narrowing in the suction tubing.

Use tubing suited to the pressures involved.

Low rotation speed.

Check the voltage at the pump. Adjust voltage and/

or use cables of greater cross section.

The suction tubing is resting at the bottom of

the tank.

Raise the tubing.

Increased pump noise.

Cavitation occurring.

Reduce suction pressure.

Irregular functioning of the bypass.

Dispense fuel until the air is purged from the

bypass system.

Air present in the diesel fuel.

Verify the suction connections.

Leakage from the body pump.

Seal damaged.

Check and replace the seal.

7. TROUBLESHOOTING

g.5

g.4

TP96.V2, TP9624.V2 Issue No: 1 - 30/04/12

1 2 3

Comentários a estes Manuais

Sem comentários

Sealey TP96 Manual do Utilizador Página 3

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Sealey TP96