Sealey EU908 Manual do Utilizador descarregar pdf (Página 54)

Flow Test

Test Value 0.10 %

Min Limit 0.00 %

Max Limit 95.0 %

Status OK

Figure 6.31

8) Press ESC button to return to the previous menus.

6.8. Component Test

The Component Test function allows initiating a leak test for the

vehicle's EVAP system. The scan tool itself does not perform the

leak test, but commands the vehicle's on-board computer to start

the test. Different vehicle manufacturers might have different

criteria and methods for stopping the test once it has been started.

Before starting the Component Test, refer to the vehicle service

manual for instructions to stop the test.

1) Use the UP/DOWN scroll button to select Component Test from

Diagnostic Menu and press the OK button. (Figure 6.3)

2) Wait for the scan tool to display the Component Test menu.

Component Test

1.EVAP Sys. Leak Test

Figure 6.32

3) If the test has been initiated by the vehicle, a confirmation

message will be displayed on the screen.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 87 88

Sem comentários

Sealey EU908 Manual do Utilizador Página 54