Sealey 5001 Manual do Utilizador descarregar pdf (Página 3)

6. TROUBLESHOOTING

PROBLEM CAUSE REMEDY

Jack will not lift to full height Oil level low Check/top up oil level

Jack will not hold the load Release valve not closing Contact authorised service agent

Hydraulic jack oil is contaminated

Pump valves not sealing

Lift arm will not lower Cylinder ram binding Contact authorised service agent

Parts worn

Internal component damage

Broken or unhooked return spring

Lift arm linkage either bent or binding

Jack feels spongy when lifting System requires bleeding Refer to bleeding procedure at Section 3.2

Environmental Protection

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be

sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.

When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)

into approved containers and dispose of the product and the fluids according to local regulations.

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

IMPORTANT: No liability is accepted for incorrect use of this product.

WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.

01284 757500

01284 703534

sales@sealey.co.uk

Sole UK Distributor, Sealey Group,

Kempson Way, Suffolk Business Park,

Bury St. Edmunds, Suffolk,

IP32 7AR

www.sealey.co.uk

Original Language Version

5001.V3 Issue: 1 - 19/03/15

1 2 3

Comentários a estes Manuais

Sem comentários

Sealey 5001 Manual do Utilizador Página 3

Comentários a estes Manuais

Manuais e produtos relacionados com Ferramentas Sealey 5001