Sealey RE97XS10 Manual do Utilizador descarregar pdf

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according

to these instructions and properly maintained, give you years of trouble free performance.

1. SAFETY INSTRUCTIONS

2. SPECIFICATIONS

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE

PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR

PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.

WARNING! Ensure Health & Safety, local authority and general workshop practice regulations are adhered

to when using this equipment.

3 Familiarise yourself with product application and limitations, as well as the specific hazards peculiar to the kit.

WARNING! Disconnect the ram from the hydraulic pump before servicing or performing any maintenance

on the unit.

3 Maintain kit in good order. Replace/repair with genuine parts only. Unauthorised parts may be dangerous and

will invalidate the warranty.

3 Keep the ram clean for best and safest performance.

WARNING! Ensure you know how much load you are pushing. Never exceed the maximum pushing

capacity.

3 Use only with Sealey hydraulic pump and accessories. Wrong equipment may damage unit and invalidate your

warranty.

3 We recommend the use of BS approved safety impact goggles and heavy duty gloves when working with this

equipment. Both are available from your authorised Sealey dealer.

3 Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.

3 If working on an off centre load, pump with care. If you feel undue resistance, stop and re-adjust the set-up.

WARNING! Keep your hands, body and clothing away from the ram and load when in use.

Take any necessary precautions to protect your personal safety whilst using the ram.

Always be prepared for unexpected load movement, never place yourself or any part of your body in a

position that could result in injury, always use a crowbar or similar device to manoeuvre the load.

3 Ensure the hydraulic hose is not bent or kinked but laid out correctly. Avoid damage to the hose (e.g.

crushing/cutting).

3 Keep non-essential persons away from the operating area. Be aware of the locations of other persons

assisting you.

3 When releasing tension from the load be sure to undo the hydraulic valve VERY slowly.

DO NOT operate the ram if any parts are damaged or missing as this may cause failure and/or personal

injury

WARNING! DO NOT use for any purpose other than for which it is designed.

7 DO NOT heat accessories as this may weaken them.

7 DO NOT modify accessories for use with this ram.

3 When not in use, place dust cap in end of hydraulic connector and store the ram, in a safe, dry

childproof location.

Only fully trained and qualified persons should use this equipment. These instructions are not a

substitute for user receiving full supervised training by a qualified person. It is important the user understands

the applications, limitations and potential hazards of the product.

Ram Model No. Type. Capacity. Closed /Open Height.

RE97XS05 Push

5000kg 33/39mm

RE97XS10 Push 10000kg 43/54mm

RE97XS20 Push 20000kg 52/63mm

RE97XS30 Push 30000kg 59/71mm

RE97XS30

RE97XS10

RE97XS05

RE97XS20

RE97XS05, RE97XS10, RE97XS20, RE97XS30 - 1 - 091104

SHORTY PUSH RAM

Models:

RE97XS05, RE97XS10

RE97XS20, RE97XS30

SHORTY PUSH RAM

Models:

RE97XS05, RE97XS10

RE97XS20, RE97XS30

Sole UK

Distributor,

Sealey Group,

Bury S

t. Edmunds, Suffolk.

01284 757500

01284 703534

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

IMPORT

ANT

No liability is accepted for incorrect use of product. W

ARRANTY

Guarantee is 12 months from purchase date, proof of which will be required

for any claim. INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.

RE97XS05, RE97XS10, RE97XS20, RE97XS30 - 1 - 091104

sales@sealey.co.uk

www.sealey.co.uk

e-mail

Web

1 2

Resumo do Conteúdo

Página 1 - RE97XS05

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used accordingto these instructions and properly main

Página 2 - RE97XS20, RE97XS30

RE97XS051 RE97XS05.01 NUT2 RE97XS05.02 RAM3 RE97XS05.03 SEAL WASHER4 RE97XS05.04 U-CUP SEAL5 RE97XS05.05 CYLINDER BASE6 RE97XS05.06 QUICK COUPLERRE97X

Modelos relacionados RE97XS20 | RE97XS30 | RE97XS05 |

Comentários a estes Manuais

Sem comentários

Sealey RE97XS10 Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Ferramentas Sealey RE97XS10. Sealey RE97XS10 User Manual Manual do Utilizador

Resumo do Conteúdo

Modelos relacionados RE97XS20 | RE97XS30 | RE97XS05 |

Comentários a estes Manuais

Manuais e produtos relacionados com Ferramentas Sealey RE97XS10