Sealey SM1100 Manual do Utilizador Página 4

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 4
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 3
7. TROUBLESHOOTING
6. MAINTENANCE
PROBLEM POSSIBLE CAUSE SOLUTION
Motor will not run Defective On/Off switch or Replace defective parts.
defective switch cable
Motor burnt out DO NOT attempt to repair. Contact your local
authorised service agent.
Lathe slows down when turning Tools blunt Sharpen tools.
Cut too deep Reduce cut
Headstock or tailstock loose on bed Insufficient clamping Tighten large nut beneath head/tailstock to
increase clamping (adjust nut with clamping
lever ‘Off’).
Workpiece chars at tailstock end Cup centre too tight or not lubricated Back off tailstock spindle and lubricate cup centre.
 WARNING! Ensure the lathe is unplugged from the mains power supply before service or maintenance.
6.1 Keep the lathe clean and the surrounding area tidy.
6.2 Frequently blow out any dust accumulation in the motor, housing and bed. Wear eye protection when doing so.
6.3 Protect the bed from corrosion by occasionally applying automobile wax.
6.4 Regularly lightly oil control and clamp levers and threads to ensure smooth operation.
Should the motor require service or maintenance contact your local authorised service agent.
5. USING THE LATHE
WARNING! Ensure you read, understand and apply the safety instructions before using the lathe.
If you have NO turning experience, we recommend you practice until you have familiarised yourself with the applications and
limitations of the lathe and the hazards of turning.
DO NOT TAKE ANY CHANCES WHEN WORKING WITH A LATHE AND TURNING TOOLS.
Keep alert. DO NOT allow familiarity (from frequent use) to cause a careless mistake. Remember, failure to operate the lathe
correctly is dangerous and may cause serious damage and/or personal injury.
5.1. Fasten the workpiece securely to the faceplate or between centres. When screwing a workpiece to the faceplate use brass wood
screws and check that the points of the screws will not foul the tool during turning.
5.2. Adjust the tool rest to suit, ensuring that it is close to the workpiece and, for spindle turning, positioned above the centre line of the
workpiece.
5.3. To confirm that the workpiece will not hit any part of the lathe always rotate it by hand before turning on the motor.
5.4. Check that all clamps and locks are tightened before switching on the lathe.
5.5. Rough out “out-of-round” workpieces at a slow speed. Running the lathe too fast will cause vibration, which may result in the
workpiece being thrown from the lathe, or the tool being pulled from your hand.
5.6. Keep a firm control of the cutting tool. Care must be exercised when wood knots or voids in the workpiece are exposed.
5.7. Complete any hand sanding before removing the workpiece from the lathe. Ensure that the lathe speed during sanding does not
exceed the last cutting speed used.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
sales@sealey.co.uk
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Web
email
Original Language Version
SM1100.V2 Issue: 3 - 23/03/10
Vista de página 3
1 2 3 4

Comentários a estes Manuais

Sem comentários

Sony PCV-RZ24G manuales

Manuales del propietario y guías del usuario para Ordenadores Sony PCV-RZ24G.
Ofrecemos 1 manuales en pdf Sony PCV-RZ24G para descargar gratis por tipos de documentos: Manual de usuario






Más productos y manuales para Ordenadores Sony

Modelos Tipo de documento
PCV-RZ50N Manual de usuario   Sony PCV-RZ50N User Manual, 245 paginas
PCV-RZ10CG Manual de usuario   Sony PCV-RZ10CG User Manual, 1 paginas
PCV-RS400CG Manual de usuario   Sony PCV-RS400CG User Manual, 146 paginas
VGC-RT100Y Manual de usuario   Sony VGC-RT100Y User Manual, 220 paginas
PCV-L400 Manual de usuario   Sony PCV-L400 User Manual, 1049 paginas
PCV-RZ40CP Manual de usuario   Sony PCV-RZ40CP User Manual, 91 paginas
PCV-RS322 Manual de usuario   Sony PCV-RS322 User Manual, 161 paginas
PCV-RS510 Manual de usuario   Sony PCV-RS510 User Manual, 143 paginas
PCV-RX480DS Manual de usuario   Sony PCV-RX480DS User Manual, 101 paginas
PCG-R505TEK Manual de usuario   Sony PCG-R505TEK User Manual, 150 paginas
PCV-RX670 Manual de usuario   Sony PCV-RX670 User Manual, 94 paginas
PCWA-A220 Manual de usuario   Sony PCWA-A220 User Manual, 17 paginas
PCV-L600 Manual de usuario   Sony PCV-L600 User Manual, 1049 paginas
PCV-LX910 Manual de usuario   Sony PCV-LX910 User Manual, 124 paginas
PCV-RS310 Manual de usuario   Sony PCV-RS310 User Manual, 102 paginas
PCWA-C800S Manual de usuario   Sony PCWA-C800S User Manual, 81 paginas
VGC-JS320J Manual de usuario     Sony VGC-JS320J User Manual, 16 paginas
PCV-R549DS Manual de usuario   Sony PCV-R549DS User Manual, 514 paginas
PCV-RS710GX Manual de usuario   Sony PCV-RS710GX User Manual, 180 paginas
VGC-LS1 Manual de usuario   Sony VGC-LS1 User Manual, 16 paginas