Sealey SA206R Manual do Utilizador descarregar pdf

INSTRUCTIONS FOR:

AIR REGULATOR, FILTER, LUBRICATOR RANGE

MODEL No: SA206, SA206FR, SA206F, SA206L,

SA206R, SA206FRAD, SA206FAD.

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and

properly maintained, give you years of trouble free performance.

1. SAFETY INSTRUCTIONS

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.

USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE

DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.



WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this equipment.

 WARNING! Disconnect the equipment from the air supply before changing accessories, servicing or performing any maintenance.

 Keep the equipment clean and maintain it in good condition (use an authorised service agent).

 Replace or repair damaged parts. Use genuine parts only. Unauthorised parts may be dangerous and will invalidate the warranty.

 WARNING! Ensure that the correct air pressure is maintained and not exceeded.

 Keep air hoses away from heat, oil and sharp edges. Check hoses for wear before each use and ensure that all connections are secure.

 DO NOT direct air from the air hose at yourself, others or animals.

 Drain the compressor air tank daily. Water in the air line will damage your equipment.

 When work is complete ensure that the air supply is turned off.

Suitable for industrial workshop air supply set-ups where high volume applications are required. Regulator assemblies feature locking control

knob for pre-setting air pressure and large easy-to-read pressure gauge. Filters available with manual or auto drain facility with female

1/8”BSP outlet. Lubricator includes oil/air mix control and sight glass. Filter and lubricator are fitted with metal bowl cages for protection.

SA206, SA206FR, SA206FRAD and SA206R supplied with mounting bracket.

2. INTRODUCTION & SPECIFICATIONS

Filter/Lubricator/Regulator - SA206

Max. inlet pressure ....................150psi (10.3 bar)

Max. outlet pressure ....................125psi (8.6 bar)

Max. flow rate @ 100psi (6.9 bar) ................105cfm

Filter .....................................25 micron

Lubricant ........Sealey Air Tool Oil - ATO/500 or ATO/1000

Ports-Inlet ..................................1/2”BSP

Outlet .................................1/2”BSP

Gauge ................................1/4”BSP

Filter/Regulator - SA206FR, SA206FRAD

Max. inlet pressure ....................150psi (10.3 bar)

Max. outlet pressure ....................125psi (8.6 bar)

Max. flow rate @ 100psi (6.9 bar) ................140cfm

Filter .....................................25 micron

Ports-Inlet ..................................1/2”BSP

Outlet .................................1/2”BSP

Gauge ................................1/4”BSP

Auto drain .......................... SA206FRAD only

Regulator - SA206R

Max. inlet pressure ....................150psi (10.3 bar)

Max. outlet pressure ....................125psi (8.6 bar)

Max. flow rate @ 100psi (6.9 bar) ................210cfm

Ports-Inlet ..................................1/2”BSP

Outlet .................................1/2”BSP

Gauge ................................1/4”BSP

Filter - SA206F, SA206FAD

Max. inlet pressure ....................150psi (10.3 bar)

Max. outlet pressure ....................125psi (8.6 bar)

Max. flow rate @ 100psi (6.9 bar) ................140cfm

Filter .....................................25 micron

Ports-Inlet ..................................1/2”BSP

Outlet .................................1/2”BSP

Auto drain ............................SA206FAD only

Lubricator - SA206L

Max. inlet pressure ....................150psi (10.3 bar)

Max. outlet pressure ....................125psi (8.6 bar)

Max. flow rate @ 100psi (6.9 bar) ................175cfm

Lubricant ........Sealey Air Tool Oil - ATO/500 or ATO/1000

Ports-Inlet ..................................1/2”BSP

Outlet .................................1/2”BSP

WARNING! Filter and lubricator bowls are manufactured

from polycarbonate and must not be used at temperatures

over 125°F (52°C) or for pressures over 218psi (15 bar).

Polycarbonate can be damaged and may fail if exposed to

certain solvents either internally or externally - strong

alkalies, compressor oils containing aromatic hydrocarbons

or fire retardant oils, or the fumes of any of these. Clean

with warm water only.

SA206 SA206FR & SA206FRAD SA206F & SA206FADSA206L SA206R

SA206/206FR/206F/206L/206R/206FAD/206FRAD Issue: 3 - 16/03/10

Original Language Version

1 2

Resumo do Conteúdo

Página 1 - SA206R, SA206FRAD, SA206FAD

INSTRUCTIONS FOR: AIR REGULATOR, FILTER, LUBRICATOR RANGE MODEL No: SA206, SA206FR, SA206F, SA206L, SA206R, SA206FRAD, SA206FAD.Thank you for purchasi

Página 2 - 01284 703534

4. OPERATION4.1. Regulator - The output pressure is controlled by the knob. Before pressurising the air system for the first time, pull out and ro

Modelos relacionados SA206FR | SA206FRAD | SA206L | SA206FAD |

Comentários a estes Manuais

Sem comentários

Sealey SA206R Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Hardware Sealey SA206R. Sealey SA206R User Manual Manual do Utilizador

Resumo do Conteúdo

Modelos relacionados SA206FR | SA206FRAD | SA206L | SA206FAD |

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Sealey SA206R