
TP6918 Issue No: 1 - 19/08/08
4. OPERATION
5. TROUBLESHOOTING
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
4.1 Insert the end of the hose into a suitable container. Start operating the pump handle, the initial strokes should be rapid to help prime the
pump,thepumpshouldstarttodispensetheuidwithinsevenstrokesofthepumphandle.
NOTE: DO NOT use undue pressure on the pump handle as this may cause the pump neck to fracture.
4.2 When pumping is completed, insert the nozzle into the nozzle holder. The handle may be locked into position using the latch on the
pump body and a padlock.
01284 757500
sales@sealey.co.uk
www.sealey.co.uk
01284 703534
e-mail
Sole U.K. Distributor
Sealey Group
Bury St. Edmunds
Suffolk.
Web
Problem Cause Remedy
Pumpdoesnotdispenseorowisrestricted Pump not able to create adequate suction Prime pump, see section 4.1
Pumpisdrawinginairinsteadofuid Tighten suction tube to pump inlet
connection
Extension seal failure between
suction tube sections
Pump inlet is blocked
Remove suction tube and clean
wire mesh screen at pump inlet
Leakageofuidfrompumphandlepiston Damagedsealduetoincompatibleuids Return to your Sealey dealer
Pump Outlet
Pump Handle
Locking Latch
Pump Inlet
Pump Body
Bung Nut
Dispensing
Nozzle
Nozzle
Holder
Telescopic
Suction Tube
Parts support is available for this product. To obtain a parts list and diagram please log on to:
www.sealey.co.uk, email sales@sealey.co.uk or phone 01284 757500
Comentários a estes Manuais